Match the mount to your surface and your freedom to drill. Renters and brick wall owners need clamp or adhesive mounts that avoid permanent holes. Homeowners who can drill get the strongest hold from screw plates. The main tradeoff is holding power versus wall damage, so the right pick changes with your door frame and landlord rules.
The Surface Decides the Mount
A mount that works on smooth vinyl siding often fails on brick or stucco. Brick walls have uneven texture, so an adhesive pad may not get full contact. A clamp mount needs a door frame with enough flat depth for its jaws to grip.
Check the listing for the surface it is designed for. Some mounts say wood and vinyl only, while others include masonry screws for brick. If you have a narrow door frame, measure the frame depth before you buy. A clamp that opens 2 inches will not fit a frame that is only 1 inch deep.
Rental apartments add a second constraint. Many leases ban holes in exterior walls, so a screw plate is off the table. An adhesive mount or a clamp that grabs the door frame without drilling becomes the realistic choice.
Mount Styles Ranked by What They Give Up
Four main styles cover most Ring doorbell anti theft mounts. Each trades something for its main benefit, so the right one depends on how much you value wall condition versus theft protection.
| Mount style | Hold strength | Wall damage | Best surface | Suits |
|---|---|---|---|---|
| Adhesive pad | Low to medium | None if removed carefully | Smooth paint, vinyl | Renters, short term |
| Clamp on frame | Medium | None or minor marks | Wood or metal door frames | Apartments, no drilling |
| Screw plate | High | Permanent holes | Wood, brick with anchors | Homeowners, high theft areas |
| Locking cover | Highest | Permanent holes | Any drilled surface | High theft areas, gates |
A locking cover wraps around the doorbell and uses a key or security screw. It has the strongest hold, but it also changes the doorbell's look and may block the motion sensor if the cutout is wrong. Check the listing for sensor and camera cutout positions.
An adhesive mount is the easiest to install, but its hold depends on surface prep. Dirt, moisture, or cold weather weakens the bond. If you go this route, clean the surface with alcohol and press for the full time the listing states.
How a Thief Actually Takes the Doorbell
Most Ring doorbells pop off their base with a small tool or a firm twist. An anti theft mount works by hiding that release point or making the doorbell harder to grip.
A cover that encloses the doorbell is the strongest deterrent. It hides the release button and forces a thief to attack the mount itself. A clamp or screw plate only slows someone down, because the doorbell still pops off its base the normal way.
Look for mounts that block access to the bottom of the doorbell. That is where most release buttons sit. A mount that leaves the bottom open does little for anti theft, even if it holds the doorbell firmly to the wall.
Rental Rules and the Case for Skipping a Mount
If your lease forbids drilling and your door frame is too shallow for a clamp, an adhesive mount is the main option. But adhesive strength drops over time and in wet climates. A better alternative may be a no drill doorbell mount that uses a different attachment method, or even a wedge that angles the doorbell without securing it against theft.
Some renters skip the anti theft mount and rely on the doorbell's own security screw plus a video recording of any theft. That may be enough if the area is low risk and the doorbell is visible from the street.
For outside gates, a screw plate or locking cover is usually the only reliable choice. Gates see weather from both sides and are often the first thing a thief touches. A Ring doorbell wedge that only tilts the camera will not stop someone from yanking the whole unit off a gate post.
Weather and Long Term Care
An outdoor mount faces sun, rain, and temperature swings every day. Plastic mounts can warp in direct sun, which loosens the clamp or shifts the screw holes. Metal mounts resist warping but may rust if the coating chips.
Check the listing for a weather resistance rating or at least a note about outdoor use. Some silicone and plastic parts say indoor use only, which means they will degrade fast on a shaded porch.
Long term, a screw plate needs occasional tightening. A clamp mount needs its jaws checked after storms. An adhesive mount may need replacement after a year or two, especially in humid or coastal air. Factor that into the total cost.
Listing Checks That Catch the Wrong Mount
Start with the surface list. If the listing does not name your surface, do not assume it works. Ask the seller for the exact clamp opening or screw length before you buy.
Second, check the camera and sensor cutouts. A cover that blocks the motion sensor turns your doorbell into a fancy paperweight. The listing should show the doorbell's field of view through the mount.
Third, look at the release mechanism. If the listing does not say how the doorbell comes out of the mount, that is a red flag. Some mounts lock the doorbell in so well that battery changes become a ten minute job.
Finally, compare the mount's thickness to your doorbell's distance from the door frame. A thick cover can push the doorbell out far enough that it no longer sees visitors at the door, only the wall beside it.
Ring Anti Theft Mount Questions, Answered Flat Out
Is a Ring doorbell anti theft mount worth it?
It depends on your theft risk and your surface. In a high foot traffic area or on a gate, a locking cover or screw plate is worth the extra effort. In a quiet neighborhood with a visible doorbell, the built in security screw and video recording may be enough. The mount also adds wall protection, which matters if you rent.
Which Ring doorbell mount works on brick?
A screw plate with masonry anchors holds best on brick. Adhesive pads struggle with brick's rough, dusty surface, and clamp mounts need a flat frame, not a brick wall. Check the listing for masonry screws and drill a pilot hole with a masonry bit. Some mounts say brick compatible but only include wood screws.
Can I install a Ring doorbell mount without drilling?
Yes, with an adhesive pad or a clamp mount that grips the door frame. Adhesive works only on smooth, clean surfaces and loses strength in extreme weather. A clamp needs a door frame with enough depth for its jaws. Both avoid permanent holes, which makes them the main rental friendly options.
What makes a Ring doorbell mount anti theft?
It blocks access to the doorbell's release mechanism or makes the doorbell harder to grip. A cover that encloses the doorbell and locks with a key is the strongest. A clamp or screw plate only slows a thief, because the doorbell still pops off its base. Look for a mount that hides the bottom release button.
Does a Ring anti theft mount block the camera?
A poorly designed cover can block the motion sensor or camera. Check the listing for cutouts that match your doorbell model's sensor and lens positions. A thick cover can also push the doorbell out from the wall and change its field of view, so compare the mount's depth to your doorbell's normal position.
The Mount That Fits Your Wall and Your Lease
A renter with a smooth door frame gets the most use from a clamp mount that needs no holes and still slows a casual thief. Pair it with the doorbell's security screw and you keep both the deposit and the doorbell. A homeowner on a brick wall or an outside gate should skip the clamp and drill in a screw plate with masonry anchors, because that surface defeats every no drill option.
Real ring doorbell anti theft mount listings, so you can check the points in this guide against actual products. These are affiliate links: as an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
DUKOYB Anti-Theft Ring/Blink Doorbell Mount for 2026 Newest Battery Doorbell/Plus/Pro (2nd…
View on Amazon ↗
KIMILAR KIMILAR Anti-Theft Doorbell Mount Compatible with Ring/Blink(2026 Release) | For…
View on Amazon ↗
QIBOX QIBOX Anti-Theft Doorbell Mount - Compatible with Ring/Blink (2026 Release)…
View on Amazon ↗
Listing names and images come from Amazon and are rechecked against the live listings; last checked Nov 8, 2026. No prices shown; the current price is on the listing.
Scope and limits. Use this guide as a checklist to hold against any listing you are considering. It covers the product type as a whole, not individual models, and is written from general category knowledge without reading product documents or tests. Verify any dimension or surface claim on the listing before you buy.