Perilogics suits travelers who want a universal clamp for tray tables and desks, and it folds for packing. MiiKARE gives a second clamp style with a tabletop mode and quiet joints. Fioenna and UGREEN both use MagSafe magnets, but Fioenna adds a mechanical knob for tight spaces while UGREEN is lighter and clips more surfaces. Caddie Buddy is the only yoke mount for pilots, and Dosvsi is a cockpit suction cup for windshields and side windows. The main tradeoff is clamp security for any phone versus magnet speed for MagSafe phones, with the pilot options serving a different location entirely.
Perilogics Universal Airplane Phone Holder
Best for: Tray table viewing with a phone up to 3.82 inches wide
- Clamp opens to 1.6 inches and fits firm, flat edges like tray tables and desks.
- Dual 360 degree joints set portrait or landscape for movies, reading, and video calls.
- Folds compact for packing and also works on luggage handles and kitchen shelves.
Keep in mind: Avoid rounded or padded surfaces; the clamp needs a firm edge.
Check price on Amazon ↗
MiiKARE Airplane Phone Holder
Best for: Using one holder on a tray table and as a tabletop stand
- Bottom clamp attaches to tray tables, desk edges, or cabinet edges.
- Flex the lower part back to use the top clamp as a tabletop stand.
- Pocket size design folds for a backpack or suitcase and adjusts silently.
Keep in mind: Remove phone wallets or card holders before clamping for a secure fit.
Check price on Amazon ↗
Fioenna MagSafe Airplane Phone Holder
Best for: MagSafe iPhone users who want a knob tightened base
- Dual ring magnetic track holds MagSafe iPhones and MagSafe cases.
- 20 N55 magnets keep the phone attached on airplanes and trains.
- Mechanical knob extends an alloy base for stable install in small tray spaces.
Keep in mind: Android phones need the included magnetic ring attached to the phone or case.
Check price on Amazon ↗
UGREEN MagSafe Airplane Phone Holder
Best for: Light packing with a MagSafe phone and a wide grip clip
- Magnetic power holds the phone in 0.1 seconds and avoids falling.
- Clip distance of 8 to 25 mm mounts on plane trays, kitchen cabinets, and coffee tables.
- Lightweight and compact, it doubles as a portable phone stand for a car or desk.
Keep in mind: IPhone 11 and older or Android phones need the included metal ring attached.
Check price on Amazon ↗
Caddie Buddy Yoke Phone Mount
Best for: Pilots who mount a phone or GPS on the control yoke
- Fits all airplane yokes and installs in seconds with no tools.
- Holds phones and GPS units from 2.3 to 4 inches wide.
- Completely adjustable and made in the USA.
Keep in mind: Listing states no rotation range, so confirm the viewing angle before buying.
Check price on Amazon ↗
Dosvsi Pilot Cockpit Suction Cup Mount
Best for: Cockpit side window or windshield mounting for 4 to 13 inch devices
- Vacuum suction cup with one click locking attaches to windshield or side window.
- Double section metal arm and three 360 degree ball joints adjust angle and reduce glare.
- Clamp holds phones and tablets from 4 to 13 inches with non slip silicone pads.
Keep in mind: Clean the windshield and suction cup first; the adhesive disk is not for highly curved surfaces.
Check price on Amazon ↗Product names and images come from the Amazon listings and are rechecked against them (last checked Nov 8, 2026). The highlights restate each listing's own bullet points as published on Nov 8, 2026. Prices change often, so we do not show them. These are affiliate links: as an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Clamp Width and Phone Fit
The clamp style mounts state a width range for the phone and the surface they grab. Perilogics lists phone width from 2.17 to 3.82 inches and a base clamp opening up to 1.6 inches. MiiKARE does not give a phone width number, but its clamp holds phones with the top clamp and its bottom clamp opens for tray tables and desk edges. Both warn against bulky cases or accessories.
Caddie Buddy is the outlier because it clamps to a yoke, not a tray. It fits phones and GPS units from 2.3 to 4 inches wide, which covers many phones but not small accessories. Dosvsi uses a phone clamp for devices from 4 to 13 inches, so it also accepts small tablets. That makes it the only pick that can hold an iPad in the cockpit.
For MagSafe mounts, the phone width is less relevant than the magnetic alignment. Fioenna and UGREEN both list iPhone 12 and later compatibility, including MagSafe cases. Android phones need an included metal ring on both. A buyer with an older iPhone or a thick case should check the clamp mounts instead.
- Perilogics: phone 2.17 to 3.82 in, base clamp to 1.6 in
- Caddie Buddy: phone or GPS 2.3 to 4 in, fits all yokes
- Dosvsi: device 4 to 13 in, suction cup 3.38 in diameter
Mounting Location and Surface
Where the mount attaches decides if it works on your flight. Perilogics and MiiKARE clamp to firm, flat edges like tray tables, desks, shelves, and compatible luggage handles. Perilogics specifically warns against rounded, padded, or flexible surfaces. MiiKARE adds a second method: flex the lower part back and use the top clamp on both sides of the phone to create a tabletop stand.
UGREEN also uses a wide grip clip with a distance of 8 to 25 mm, so it mounts on plane trays, kitchen cabinets, camping tables, and coffee tables. Fioenna's mechanical knob extends an alloy base at the bottom, which the listing says is more stable than traditional clip on installation for small spaces like airplane dining tables.
Caddie Buddy mounts only on airplane yokes, which limits it to pilots or passengers in the front seats. Dosvsi uses a vacuum suction cup for the windshield or side window of an aircraft cockpit, with an included adhesive disk for semi permanent mounting on dash or flat surfaces. It is not for tray tables.
- Tray table clamps: Perilogics, MiiKARE, UGREEN, Fioenna
- Yoke mount: Caddie Buddy only
- Cockpit suction cup: Dosvsi only
Rotation and Viewing Angles
Most listings state a rotation range. Perilogics has dual 360 degree rotating joints for portrait or landscape. MiiKARE also lists 360 degree rotation and says the joints adjust smoothly and silently. UGREEN lists 360 degree adjustment for horizontal and vertical modes. Fioenna specifies a 360 degree rotating bearing and a 270 degree rotating connecting rod.
Dosvsi gives the most detailed adjustment: a double section metal arm and three 360 degree rotating threaded ball joints, with 360 degree rotation, 180 degree tilt, and horizontal or vertical positioning. It also says the arm reduces glare from sunlight, which is useful in a cockpit.
Caddie Buddy says only 'completely adjustable' without a rotation number. A buyer who wants a specific angle for a yoke should confirm that with the seller. The other five all allow some form of portrait and landscape switching, but the arm length changes how far the phone sits from the mount point.
- Dual 360 joints: Perilogics
- 360 rotation, silent joints: MiiKARE
- 360 bearing, 270 rod: Fioenna
- 360 adjustment: UGREEN
- Three ball joints, 180 tilt: Dosvsi
Magnet Strength and MagSafe Fit
Fioenna and UGREEN are the two MagSafe picks, and their listings emphasize magnet strength. Fioenna has 20 reinforced N55 magnets and says the phone stays firmly attached on airplanes and trains. Its dual ring magnetic track is designed for MagSafe, and the listing says Android phones require the included magnetic ring.
UGREEN says its upgraded magnetic power holds the phone in 0.1 seconds and tells the buyer not to fear falling during use. It is optimized for iPhone 12 and later, and like Fioenna, it includes a metal ring for iPhone 11 and below or Android phones.
The clamp mounts do not use magnets, so they work with any phone in their width range, regardless of case material. A buyer with a non MagSafe phone who does not want to attach a ring should choose Perilogics or MiiKARE. The magnet mounts are faster to attach but depend on a clean metal surface or a MagSafe case.
- Fioenna: 20 N55 magnets, MagSafe track
- UGREEN: magnetic hold in 0.1 seconds
- Clamp mounts: no magnet, any phone in width range
Comparison Table of Stated Specs
The table below uses only what each listing states. Blank cells mean the listing does not give that number or detail. Use it to narrow down by phone size, mount surface, and rotation before you read the full listing.
| Product | Phone or device width | Mount surface | Rotation stated | Magnet or clamp |
|---|---|---|---|---|
| Perilogics | 2.17 to 3.82 in | Firm flat edges, tray tables, desks, luggage handles | Dual 360 degree joints | Clamp |
| MiiKARE | Not listed | Tray table, desk edge, cabinet edge, tabletop mode | 360 degree rotation | Clamp |
| Fioenna | MagSafe iPhone 12 to 17 | Airplane dining tables, desks, chairs, shelves | 360 bearing, 270 rod | Magnet |
| UGREEN | MagSafe iPhone 12 and later | Plane trays, kitchen cabinets, camping or coffee tables | 360 degree adjustment | Magnet |
| Caddie Buddy | 2.3 to 4 in, phones and GPS | Airplane yokes | Completely adjustable, no number | Clamp |
| Dosvsi | 4 to 13 in, phones and tablets | Windshield or side window, dash with disk | 360 rotation, 180 tilt | Suction cup |
Who Should Skip These or Look Elsewhere
Skip all six if your phone has a very thick rugged case, a battery case, a phone wallet, or a large grip. Perilogics says those reduce clamping stability, and MiiKARE recommends removing bulky accessories before use. The MagSafe mounts may not hold a non MagSafe phone unless you attach the included ring, which adds a step and may not suit a case you swap often.
If you need a mount for a curved or padded surface, the clamp mounts will not work, and the suction cup is only for smooth glass or flat dash with the adhesive disk. Caddie Buddy is useless outside an airplane yoke, so a passenger in a cabin should not buy it for tray table use.
A buyer who wants a mount that works in a car and on a plane might prefer UGREEN because its clip fits more surfaces, but its magnet still limits phone compatibility. If you want one holder for a tablet and a phone in a cockpit, Dosvsi is the only option, but it is not portable in the same way as the folding clamps.
- Thick or bulky cases: choose a clamp mount or remove case
- Curved or padded edges: none of the clamp mounts fit
- Cabin passenger: skip Caddie Buddy yoke mount
- Non MagSafe phone without ring: skip Fioenna and UGREEN
Questions Before You Pick a Mount
Can I use a MagSafe airplane phone mount with an Android phone?
The Fioenna and UGREEN listings both say Android phones need the included magnetic ring attached to the back of the phone or case. Without that ring, the magnet will not hold. A clamp mount like Perilogics or MiiKARE works with any phone in the stated width range without extra parts.
Will a tray table clamp hold during turbulence?
Perilogics says strong vibration, sudden movement, or severe turbulence may affect stability, so no clamp mount is a guarantee. The listing advises using firm, flat edges and avoiding rounded or padded surfaces. For a cockpit, the Dosvsi suction cup is designed for turbulent conditions, but it also needs a clean, smooth surface.
What is the difference between a yoke mount and a cockpit suction cup mount?
A yoke mount like the Caddie Buddy clamps onto the control yoke in front of the pilot, so the phone sits near the hands. A suction cup mount like the Dosvsi attaches to the windshield or side window, placing the phone in the pilot's line of sight. The yoke mount only fits yokes, while the suction cup can also mount on a dash with the included disk.
Which Airplane Phone Mount Fits Your Flight
A traveler who wants one clamp for tray tables, desks, and luggage handles and does not want to attach a magnetic ring should get the Perilogics Universal Airplane Phone Holder. Its stated phone width up to 3.82 inches and dual 360 joints cover most phones, and it folds for a carry on. A pilot who needs a mount on the control yoke and flies with a phone or GPS from 2.3 to 4 inches wide has a different need: the Caddie Buddy Yoke Phone Mount is the only pick that fits that location and installs without tools. For a cockpit window or dash, step up to the Dosvsi suction cup mount.
What this guide is. The picks were chosen by comparing the stated clamp widths, mount surfaces, rotation ranges, and magnet details across the six listings, and by keeping a spread of designs: two tray table clamps, two MagSafe magnets, one yoke mount, and one cockpit suction cup. No units were handled or used, so the shortlist reflects only what each listing text says, not how the mounts perform in a real cabin or cockpit.